How can I tell which network my token uses?

Many of the tokens in Exodus run on another network, so they require another asset to pay for transaction fees, or gas.

If you need a self-custody crypto wallet to send and exchange crypto on all supported networks, you can download Exodus here. 

In this article:

How can I tell which network a token uses?

It's important to know which network your assets run on when you are to sending, receiving, or exchanging assets in Exodus.

To quickly identify the network of an asset in Exodus, you can look at the network badge or the network logo. For tokens that use multiple networks, you can also use the dropdown menu in the token's wallet to select a network.

If an asset doesn't have a network badge or dropdown menu, it runs on its own network. For example, Litecoin (LTC) does not have a network badge or dropdown menu, so it can only be sent, received and exchanged on the Litecoin network.

Let's take a closer look at how to identify the network for an asset on Exodus Web3 Wallet, Desktop, and Mobile.

Tutorial video: How can I tell which network my token uses?

Web3 Wallet

Desktop

Mobile

Identifying network badges

Web3 Wallet

In Exodus Web3 Wallet, you can see which network a token uses by the network badge and the network logo. Here's how:

1
a) Click on the profile icon, then b) click on Assets.

2

Here, you can identify the network of an asset with the network badge next to the asset's name.

With custom tokens, you will need to enable the asset to see the network badge.

3
To access the wallet of an asset, click on the asset name.

Desktop

In Exodus Desktop, you can identify the network of a token by the network badge and the network logo.

If an asset doesn't have a network badge or dropdown menu, it runs on its own network. For example, Litecoin (LTC) does not have a network badge or dropdown menu, so it can only be sent, received, and swapped on the Litecoin network.

In the wallet, you can find the network badge and logo next to the asset logo.

In the portfolio, the network badge is next to the token's ticker.

Mobile

In Exodus Mobile, you can identify the network of a token by the network badge and the network logo.

If an asset doesn't have a network badge or dropdown menu, it runs on its own network. For example, Litecoin (LTC) does not have a network badge or dropdown menu, so it can only be sent, received, and swapped on the Litecoin network.

Inside the wallet of the token, you can find the network badge next to the token's name and the network logo next to the token's logo.

In the portfolio and the settings, the network badge is next to the name of the token.

Identifying multiple networks in your portfolio

Desktop

You can identify the tokens that use multiple networks in two ways.

In the Portfolio, tokens with multiple networks enabled will display a) a dropdown menu beside the token name and b) a multi-network logo (looks like multiple stacked logos).

Mobile

You can identify the assets with multiple networks enabled in your portfolio if the asset displays the multi-network logo.

Identifying multiple networks in the token's wallet

Desktop

If a token has multiple networks enabled, you can change the network by a) clicking the dropdown menu.

After a network has been selected, you can send, receive or view your token balance on the selected network.

To view the token balance across all networks, in the dropdown menu, b) click Total balance.

Mobile

In the wallet, if a token has multiple networks enabled, you can change the network by a) clicking the dropdown menu.

When a network has been selected you can send, receive or view your token balance on the selected network. To view the token balance across all networks, in the dropdown menu, b) click Total balance.

How do I enable tokens on multiple networks?

Web3 Wallet

On Exodus Web3 Wallet you can enable and disable assets on the Ethereum, Solana, and other supported networks.

1
In Exodus Web3 Wallet, a) click the Profile icon, then b) click Assets.

2

Here you manage which assets are enabled in your wallet. For tokens that use multiple networks, to enable another network for that token, a) click the dropdown menu and b) click the checkbox next to the network you want to enable.

For more information on how to enable or disable assets, visit: How do I enable and disable assets in Exodus?

Adding an Algorand token will create an opt-in transaction which will incur a network fee. It will also increase your Algorand minimum reserve requirement by 0.1 ALGO. To learn more, visit: What is an Algorand opt-in transaction?

3
If you want to disable an asset, you can click the asset again. When an asset is disabled, the checkmark will disappear.

Desktop

1
In Exodus Desktop, to view all supported assets and networks, a) click on the Settings icon, then b) click Assets.
2
To view all the assets supported on Desktop, click the a) All Assets tab. To search for a specific asset by either name or ticker, b) use the search bar. To filter assets by network, c) click on a network tab to view assets supported on the selected network.
3

To enable a token on another network, a) click the dropdown menu, and you will see all the supported networks for that token. You can enable the token on one of the supported networks by b) clicking the checkbox next to the token.

For tokens that use multiple networks, not all networks will be enabled by default. If a network for a token is disabled, you can easily enable it by clicking the checkbox next to the token.

Mobile

1
In Exodus Mobile, you can view all supported assets and network by a) tapping on the Profile icon and b) selecting Assets.

2
Here you can scroll through all the available assets. You can also a) filter the assets by using the Search bar or b) filter assets by network using the network tabs.

3

For assets that use multiple networks, to enable the asset on another network, a) tap the dropdown menu beside the asset name and b) click the checkbox beside the network to enable it.

Not all networks will be enabled by default for assets that use multiple networks. If a network for an asset is disabled, you can easily enable it by clicking the checkbox next to the asset.

How do I send a token that runs on another network?

Sending out a token that runs on another network is the same sending other assets.

The only difference is that you will pay transaction fees in the network's primary asset. To learn more, visit: Why do I pay for a token's transactions with another asset?

It's important to make sure 

To learn how to send assets, visit: How do I send Bitcoin and other crypto out of Exodus?

How do I receive a token that runs on another network?

Receiving a token that runs on another network is the same as receiving other assets. But it's very important to make sure you select the correct network to receive your token on.

To learn how to receive assets, visit: How do I receive Bitcoin and other crypto out of Exodus?

How do I swap a token that runs on another network?

Swapping a token that runs on another network in Desktop and Mobile is the same as swapping other assets.

To learn more, visit: How do I swap crypto using the in-app exchange?

Swapping tokens in Web3 Wallet works a little differently. You can find out everything you need to know about swapping in Web3 Wallet here: How do I swap crypto in Web3 Wallet?

What happens if I send an unsupported token to Exodus?

Your Exodus wallet is capable of receiving any token on the Ethereum, Solana, BNB Smart Chain, Polygon, Avalanche, and Fantom networks. If you have sent a token to your Exodus wallet on one of these networks, you can access it by adding it as a custom token.

To learn more about adding custom tokens, visit: How do I add a custom token?

If you have sent an unsupported asset to your Exodus wallet over a network other than the ones listed above, you'll have to regain access to those funds using a wallet that supports that network and asset. Please contact Exodus Support for help with recovering your assets on unsupported networks.

Please be very careful with your 12-word secret recovery phrase and private keys, because they control access to your funds. Never share them with anyone, and only import them into platforms that you trust 100%. If you choose to import your 12-word phrase or private keys into a third-party platform, you do so at your own risk. To find out more, check out this article from our Knowledge Base: How do I keep my money safe?

Why do I pay for my token's transactions with another asset?

Some tokens in your Exodus wallet require another asset to pay for transaction fees, also known as gas.

This is because these tokens are created and hosted on another network. You can think of the network as the road and the tokens as cars on the road.

Using Ethereum as an example, the Ethereum network is the road, ERC20 tokens are the cars, and Ethereum (ETH) is both a car and the only type of gas all the cars run on.

Transaction fees are always paid in the primary asset of the network:

  • ASA tokens run on the Algorand network, so they pay transaction fees in Algorand (ALGO)
  • Avalanche tokens run on the AVAX C-Chain network, so they pay transaction fees in Avalanche (AVAX)
  • BEP20 tokens run on the BNB Smart Chain network, so they pay transaction fees in Smart Chain BNB (BSC BNB)
  • ERC20 tokens run on the Ethereum network, so they pay transaction fees in Ethereum (ETH) 
  • Fantom tokens run on the Fantom Opera network, so they pay transaction fees in Fantom (FTM)
  • Terra tokens run on the Terra Classic network, so they pay transaction fees in Terra Classic (LUNC)
  • Polygon tokens run on the Polygon network, so they pay transaction fees in Polygon (MATIC)
  • SPL tokens run on the Solana network, so they pay transaction fees in Solana (SOL)
  • TRC10 and TRC20 tokens run on the TRON network, so they pay transaction fees in TRON (TRX)

How do I pay for ASA token transactions with ALGO?

ASA tokens require Algorand (ALGO) to pay for transactions on the Algorand network.

To send or swap an ASA token, you need some ALGO in your Exodus wallet to pay for network transaction fees.

Algorand is a network with a minimum balance requirement. You can find more information here: Algorand FAQs - Learn more about ALGO.

For each ASA token you have in your wallet, the minimum deposit increases by 0.1 ALGO. So if you have ALGO and two ASA tokens, your minimum ALGO deposit will be 0.3 ALGO.

If you don’t have enough ALGO for ASA token transactions, you will get an error message that you need more ALGO in your wallet:

The Algorand network requires a small amount of ALGO to send this transaction. Deposit at least X ALGO more in your wallet then try again.

If you have some ALGO, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire ALGO by using Exodus Swap to swap from any (non-Algorand based) assets in your wallet to ALGO, or by receiving ALGO from another wallet.

You can see your Algorand network transactions on a block explorer like AlgoExplorer.

How do I pay for Avalanche token transactions with AVAX?

Avalanche tokens require Avalanche (AVAX) to pay for transactions on the Avalanche C-Chain network.

To send or swap an Avalanche token, you need some AVAX in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough AVAX for Avalanche token transactions, you will get an error message that you need more AVAX in your wallet:

The Avalanche network requires a small amount of AVAX to send this transaction. Deposit at least X AVAX more in your wallet then try again.

If you have some AVAX, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire AVAX by using Exodus Swap to swap from any (non-Avalanche based) assets in your wallet to AVAX, or by receiving AVAX from another wallet.

You can see your Avalanche network transactions on a block explorer like SnowTrace.

How do I pay for BNB Smart Chain token transactions with BSC BNB?

BNB Smart Chain BEP20 tokens require Binance coin (BNB) to pay for transactions on the BNB Smart Chain network.

To send or swap a BEP20 token, you need some BSC BNB in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough BNB for BEP20 token transactions, you will get an error message that you need more BNB in your wallet:

The BNB Smart Chain network requires a small amount of BNB to send this transaction. Deposit at least X BNB more in your wallet then try again.

If you have some BNB, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire BNB by using Exodus Swap to swap from any (non-BNB Smart Chain based) assets in your wallet to BNB, or by receiving BNB from another wallet.

You can see your BNB Smart Chain transactions on a block explorer like BscScan.

How do I pay for Ethereum token transactions with ETH?

ERC20 tokens require Ethereum (ETH) to pay for transactions on the Ethereum network.

You can enable custom fees for ETH and ERC20 tokens.

To send or swap an ERC20 token, use an ERC20 token such as DAI in Compound Finance, or send an ETH NFT, you need some ETH in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough ETH for ERC20 token or ETH NFT transactions, you will get an error message that you need more ETH in your wallet:

The Ethereum network requires a small amount of ETH to send this transaction. Deposit at least X ETH more in your wallet then try again.

If you have some ETH, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire ETH by using Exodus Swap to swap from any (non-Ethereum based) assets in your wallet to ETH, or by receiving ETH from another wallet.

During periods of high congestion, network fees increase as miners prioritize the more expensive transactions first.

You can see your ERC20 transaction information on a block explorer like Etherscan.

How do I pay for Fantom token transactions with FTM?

Fantom tokens require Fantom (FTM) to pay for transactions on the Fantom network.

To send or swap a Fantom token, you need some FTM in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough FTM for Fantom token transactions, you will get an error message that you need more FTM in your wallet:

The Fantom network requires a small amount of FTM to send this transaction. Deposit at least X FTM more in your wallet then try again.

If you have some FTM, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire FTM by using Exodus Swap to swap from any (non-Fantom based) assets in your wallet to FTM, or by receiving FTM from another wallet.

You can see your Fantom network transactions on a block explorer like FTMScan.

How do I pay for Polygon token transactions with MATIC?

Polygon tokens require Polygon (MATIC) to pay for transactions on the Polygon network.

To send or swap a Polygon token, you need some MATIC in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough MATIC for Polygon token transactions, you will get an error message that you need more MATIC in your wallet:

The Polygon network requires a small amount of MATIC to send this transaction. Deposit at least X MATIC more in your wallet then try again.

If you have some MATIC, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire MATIC by using Exodus Swap to swap from any (non-Polygon based) assets in your wallet to MATIC, or by receiving MATIC from another wallet.

You can see your Polygon network transactions on a block explorer like Polygonscan.

How do I pay for Solana token transactions with SOL?

SPL tokens require Solana (SOL) to pay for transactions on the Solana network.

To send or swap an SPL token, or send or list SOL NFTs, you need some SOL in your Exodus wallet to pay for network transaction fees.

If you don’t have enough SOL for SPL token or SOL NFT transactions, you will get an error message that you need more SOL in your wallet:

The Solana network requires a small amount of SOL to send this transaction. Deposit at least X SOL more in your wallet then try again.

If you have some SOL, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire SOL by using Exodus Swap to swap from any (non-Solana based) assets in your wallet to SOL, or by receiving SOL from another wallet.

You can see your SPL transaction information on a block explorer like Solana Explorer.

How do I pay for Terra Classic token transactions with LUNC?

Terra Classic WC20 tokens require Terra Classic (LUNC) to pay for transactions on the Terra Classic network.

To send or swap a Terra Classic WC20 token, you need some LUNC in your Exodus wallet to pay for network transaction fees, also known as gas.

If you don’t have enough LUNC for WC20 token transactions, you will get an error message that you need more LUNC in your wallet:

The Terra Classic network requires a small amount of LUNC to send this transaction. Deposit at least X LUNC more in your wallet then try again.

If you have some LUNC, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can see your Terra network transactions on a block explorer like Terra Finder.

How do I pay for TRON token transactions with TRX?

TRON tokens (TRC10 and TRC20) require TRON (TRX) to pay for transactions on the TRON network.

To send or swap a TRON TRC10 or TRC20 token, you need some TRX frozen for Energy or Bandwidth in your Exodus wallet to pay for network transaction fees, also known as gas. The TRON network transaction fee will usually be between 5 and 10 TRX.

If you don’t have enough TRX for TRC10 or TRC20 token transactions, you will get an error message that you need more TRX in your wallet:

The TRON network requires a small amount of TRX to send this transaction. Deposit at least X TRX more in your wallet then try again.

If you have some TRX, but not quite enough, the wallet will tell you the additional amount you need to deposit (the amount in X) in order to pay for the transaction.

You can acquire TRX by using Exodus Swap to swap from any (non-TRON based) assets in your wallet to TRX, or by receiving TRX from another wallet.

Newly created TRON accounts do not exist on the blockchain and need to be activated. If your Tether (USDTTRX) or BitTorrent (BTT) balance does not appear, please activate your TRON account.

You can see your TRON network transactions on a block explorer like Tronscan.

Related Articles