All Collections
Assets
Monero FAQs - Learn more about XMR
Monero FAQs - Learn more about XMR

Monero blockchain FAQs: Everything you need to know about the Monero (XMR) wallet inside of Exodus. Store and manage your XMR with Exodus.

Updated over a week ago

Everything you need to know about Monero in Exodus.

Need a crypto wallet that gives you full control of your assets? You can download Exodus here.


In this article:



General Monero FAQs

Video tutorial: How to set up a Monero wallet?


How do I open the advanced options in my Monero wallet?

Mobile

To open the Advanced Options menu, open your Monero wallet on your device. Next, tap on the Settings icon:



Desktop

To open the Advanced Options menu, a) open your Monero wallet. Next, b) click on the More menu and c) click on Advanced Options.



What is the wallet block height?

Monero works a little differently from other coins because of its privacy characteristics. While other assets pull data from the blockchain directly to reflect the balances in the wallet, Monero has to download the data from its blockchain.

By default, Exodus only downloads the most recent Monero block data for new wallets, and the wallet block height is the block your Monero wallet is downloading data from.

If you have trouble with your Monero balance, you may wish to reset your wallet block height.


Why is my wallet syncing?

For your wallet to display your transaction information correctly, it must stay in sync with the Monero blockchain.

This applies to all assets in Exodus. However, Monero is a privacy coin, and when you refresh or re-sync, the wallet will rebuild your transaction history block by block as your wallet downloads the Monero blockchain.

To help visualize this process, your wallet will display a graphical indication of the sync progress along with:

  • Remaining blocks: How many blocks until the wallet is fully synced

  • Wallet Height: The current height or current block the wallet is synced to (i.e. the number of the block the wallet has started downloading from)

  • Node Height: The current block of the connected node

  • Wallet Creation Height: The block that your Monero wallet was created.

Mobile


Desktop

This information can be used to see if there's a problem with either the node or the connection of the wallet to the node.


How do I enable and disable Monero auto-sync?

Monero auto-sync is disabled by default.

If you enable Monero auto-sync, your wallet will automatically sync with the Monero blockchain so that you can see your correct balance of Monero (XMR).

However, if auto-sync is enabled, your wallet might run a little slower. This is because it takes a lot of your wallet's processing power to keep Monero synced to the blockchain. If you would like to make your wallet run faster, you can disable auto-sync.

Keep in mind that if you disable auto-sync, your wallet might not show your correct Monero balance because it is not in sync with the blockchain.

Mobile

  1. Open Exodus Mobile and open your Monero wallet. From here, a) tap Sync to start syncing your Monero wallet. If your wallet detects a Monero balance, then Monero auto-sync will automatically be enabled.

    To manually enable or disable Monero auto-sync, b) tap the Settings icon.

  2. Here, you can toggle Enable Auto-Sync on or off.

  3. If you enable Monero auto-sync, you will be prompted to start syncing your XMR wallet. Tap Sync.

  4. Your wallet will start to sync and show you the progress on the Monero Settings screen. If you close Exodus, syncing will pause until you reopen your wallet.


  5. You will also be able to see the progress of your wallet sync on the Portfolio screen.


Desktop

  1. Open Exodus Desktop, go to your Monero (XMR) wallet. From here, you have two options:

    a) Click Sync to start syncing your Monero wallet. If your wallet detects a Monero balance, then auto-sync will automatically be enabled.

    b) To manually enable or disable Monero auto-sync, click on the More menu in the top right corner of your wallet, and c) click Advanced Options.

  2. Here, you can use the toggle switch Auto-Sync to turn Monero auto-sync on or off.

  3. When you turn Monero auto-sync on, you will be prompted to start syncing your XMR wallet. Click Sync.

  4. Your wallet will start to sync and show you the progress on the Advanced options screen. If you close Exodus, syncing will pause until you reopen your wallet.

  5. You will also be able to see the progress of your wallet sync at the bottom of the screen on the Portfolio screen.


How do I connect to a custom node?

Exodus uses a default node to connect to in order to populate the information in your wallet. Many XMR users prefer to run their own nodes to participate in the Monero network. Exodus allows you to enter a custom node of your choice. Here is how you can do so:

It's not possible to use separate custom nodes for your Exodus and Trezor Monero portfolios. If you change your custom node for your Trezor Monero portfolio, this will automatically also change the custom node used by your Exodus Monero portfolio.

To set up a custom node, it needs to be accessible via HTTPS.

Mobile

  1. Tap on the gear icon in the top right of the Monero wallet.

  2. Tap on the circle next to Custom Node to set a custom node.

  3. a) Enter your Monero custom node URL and b) tap Confirm

  4. Refresh your Monero wallet, and that's it! Your custom node is set!


Desktop

  1. In your Monero wallet, a) click the More icon in the top right corner. Next, b) click on Advanced Options.

  2. Click Set Custom Node.

  3. a) Enter your Monero custom node URL and then b) click Save.

  4. Refresh your Monero wallet, and that's it! Your custom node is set!


What are the different Monero key types?

To find all of your Monero keys, go to your Monero wallet inside of Exodus on your desktop, then click the three-dot menu icon and choose View Private Keys.

You cannot directly view your wallet’s Monero keys on your mobile device, with the exception of the transaction key (tx key), which can only be viewed from the device that sent the transaction. In addition, if you restore your wallet with the secret recovery phrase on the same device, past transaction keys will not appear.

To view your Monero keys from your mobile wallet, you will first need to sync your mobile wallet to a desktop device by following this guide.

Monero address

When sending Monero, the only thing you need is the Monero address you will be sending to. Monero addresses are much longer than Bitcoin addresses. An address for Monero will have 95 characters and be prefixed with a 4. Unlike Bitcoin addresses that are hashed from a single key pair, Monero addresses are direct representations of the associated public keys.

Mnemonic

The Monero wallet has its own 25-word secret recovery phrase. Although your Exodus secret recovery phrase will always be able to recover all of your assets, this 25-word phrase is specific to your Exodus XMR wallet if you would like to restore your Monero wallet on another platform. Due to Monero's privacy features, the view key and spend key have their own private keys associated with each - your private view key and private spend key. Your private view key is derived from the private spend key.

By storing this 25-word secret recovery phrase in a secure offline location, you have a backup of your private keys and your Monero wallet.

Private view key

The private view key is required to view all transactions related to an address. The Monero blockchain data associated with your address is not publicly viewable. In order to view any information associated with your transactions, the private view key is required.

Private spend key

The private spend key allows the spending of any Monero at an associated address. This key is used to sign Monero transactions.

Unlike a private view key, the private spend key should never be given out to anyone. If someone were to obtain your private spend key, they would then have access to spend any of the Monero associated with the address.

Transaction key

The transaction key, also referred to as a secret transaction key or tx key, is used to prove that a transaction was made on the Monero blockchain. Every Monero transaction has a transaction key. In your Exodus wallet, the transaction key is shown in the transaction details.

The transaction key can only be viewed on the device from which the transaction was sent. This means that the transaction key will not appear on another device, even if it is the same wallet with the same secret recovery phrase. In addition, if you restore your wallet with the secret recovery phrase on the same device, past transaction keys will not appear.

You can use this key to verify a send transaction. Please see the below steps on how to do this.


Does Exodus support Monero view tags?

Yes! Exodus supports Monero view tags. View tags reduce the time it takes to synchronize Monero wallets by over 40%.

View tags are 1-byte of data added to each Monero transaction using a shared secret. This shared secret is generated by the sender using the recipient's address, without the need to communicate. The first byte (character) of this shared secret is added to the transaction’s data. Your wallet checks for this data when syncing with the Monero blockchain.

View tags are added automatically, so there's nothing you need to do. With view tags, your Monero wallet will sync much faster.


Can I use Monero with Trezor in Exodus?

Yes! You can now use XMR with your Trezor Model T in Exodus. Our guide will show you everything you need to know about using Monero and Trezor in Exodus.


Addresses

Everything you need to know about your Monero wallet addresses.


How do I create a new Monero subaddress?

By default for new Exodus wallets, when you open your Monero wallet inside of Exodus and click Receive you will be shown your Monero address.

Monero subaddresses allow you to receive Monero to a different address each time, allowing you to have even more privacy!

To turn on multiple subaddresses:

Mobile

  1. In your Monero wallet, a) tap the Settings icon in the top right corner and b) click on Advanced Options.

  2. Toggle on Multiple Addresses.

  3. Next time you want to receive Monero, all you need to do is tap the arrow next to the QR code to reveal an unused subaddress!


Desktop

  1. In your Monero wallet, a) click the More icon in the top right corner. Next, b) click on Advanced Options.

  2. Locate where it says Multiple Addresses and toggle on.

  3. Next time you want to receive Monero, all you need to do is click the arrow next to the QR code to reveal an unused subaddress!


Sending and receiving Monero

How do I view my Monero balance on the blockchain?

The short answer is, you can't.

Monero is considered a privacy coin and therefore transaction details will be hidden for anyone looking on the block explorer with only the Monero address. You can look up specific Monero transaction details.

Every Monero (XMR) 'Sent/Send' transaction has a distinct transaction key that the user can use to look up and verify the transaction on the blockchain. For more on this, see below.


How do I look up a Monero transaction?

Exodus allows you to see individual transaction details inside your wallet as well as search individual transactions on the blockchain, but not the amounts or the addresses involved.

If you have a transaction ID, you can use it on a Monero block explorer such as Blockchair to learn basic information about the transaction: confirmation, fees, block ID, and date.

If you need more information about a transaction, you will need your transaction key or secret view key. For more on this, see below.

Blockchair is a third-party platform that is not affiliated with Exodus. As such, Exodus cannot guarantee the performance of its products/services or that the steps shown and the information provided will always be accurate.


How do I verify I sent Monero?

Mobile

  1. In your Monero wallet, a) tap on the sent transaction you want to verify.

  2. In the transaction details, a) you can find the address the XMR was sent to and b) the transaction key. You will need both the recipient address and transaction key later.

    Tap and hold the recipient's address or transaction key to copy the full string of characters.

    You can only view the transaction key on the same device that sent the transaction. The transaction key will not appear on another device, even in the same wallet with the same secret recovery phrase. In addition, if you restore your wallet with the secret recovery phrase on the same device, past transaction keys will not appear.

  3. Tap on the transaction ID to view the transaction on the block explorer.

  4. Blockchair will open in a browser. Scroll down and a) select Prove sending. b) Paste in the recipient's address and c) the transaction key, then d) tap Prove transaction.

  5. Scroll up and a) tap on Recipients to view the transaction outputs. b) The transaction is highlighted in green, where you can view the amount sent.


Desktop

  1. In your Monero wallet, a) click on the sent transaction you want to verify. In the transaction details, b) find the recipient address and c) the transaction key. You will need both.

    Double-click on the recipient address or transaction key to copy the full string of characters.

    You can only view the transaction key on the same device that sent the transaction. The transaction key will not appear on another device, even if it is the same wallet with the same secret recovery phrase. In addition, if you restore your wallet with the secret recovery phrase on the same device, past transaction keys will not appear.

  2. Click on the transaction ID to view the transaction on the block explorer.

  3. Blockchair will open in a browser. a) select Prove sending. b) Paste in the recipient's address and c) the transaction key, then d) click Prove transaction.

  4. The transaction will be highlighted in green, where you can view the sent amount.


How do I verify I received Monero with a deposit verification?

The process of verifying a deposit will require the use of the desktop version of Exodus. For information on how to synchronize your funded mobile wallet to a brand new desktop wallet, please follow this guide: How do I sync Exodus Mobile to Exodus Desktop?

  1. To verify a deposit, you will need your private view key. To view the private view key, go to your Monero wallet and a) click on the menu in the top right corner, then b) click View Private Keys.

  2. After reading the warning, click Yes, I'm sure.

  3. If you have set a password for your wallet, a) enter the password and b) click Unlock Now.

  4. You will be shown your Monero private keys. a) Copy your private view key and b) click Close. You will need the private view key later.

  5. a) Click on the deposit you want to verify. b) You can view the address the XMR was sent to in the transaction details. You will need that address later, along with the private view key. Double-click to copy the full string of characters.

    Next, to verify the deposit, c) click on the transaction ID to open the transaction on the block explorer.

  6. Blockchair will open in a browser. a) Select Decode outputs. b) Paste in the address the XMR was sent to and c) the private view key, then d) tap Prove transaction.

  7. Your transaction will be highlighted in green, where you can view the amount received.


What is the 10 confirmations requirement?

You will need to wait for 10 confirmations for your received Monero before you are able to send it.

What this means is your Monero is locked until it is mined in a block and then a certain number of subsequent blocks have been mined afterward in order for it to be confirmed. In Monero's case, wallets keep the funds locked for 10 blocks.

For example, say you have a balance of 10 XMR.

  • One spendable output of full 10 XMR:

    In this example, when you send 2 XMR to someone, this whole 10 XMR output gets used and the change comes back to you in a new output. Let’s say your fees were 0.01. Your transaction, therefore, sends one output with 10 XMR, and has 2 outputs, one for 2 XMR (the recipient) and one for 7.99 XMR (your change). Because the transaction needs to be confirmed, your change (7.99 XMR), will be locked until it has 10 confirmations.

  • Two or more spendable outputs of 3 XMR and 7 XMR:

    If the original balance was spread over 2 spendable outputs and you just want to send 2 XMR, only one of those outputs would be used, say the 3 XMR output. That means only your change left over from just the 3 XMR output would be locked until 10 confirmations. The other output of 7 XMR is untouched and would not be locked and would be free to spend straight away. Only what is spent needs to wait for 10 confirmations.

Did this answer your question?